160lm/W

  • 40W / 65W / 80W / 96W / 120W optional
  • DALI / 1-10V / DIMswitch dimmable optional
  • 5 / 7 / 11 wire Lighting rail
  • daylight sensor,motion sensor
  • sharp / narrow / wide / flat / asymmetric / double asymmetric angle

Coreshine LED Linear Trunking System is an energy-efficient, low maintenance better alternative to traditional linear fluorescent in a variety of industrial, commercial and light assembly applications. It is the optimal solution for conventional lighting systems and also excellent for new installations due to its low installation cost - everything in one box and installation is tool-less. It saves both time and costs when installing lighting systems.

Benefits
  • * Cost-effective light-line solution for industrial, commercial and other applications
  • * Good quality of light with high lumen output to meet different requirements
  • * Easy to install, reducing time,labor,packaging waste and complexity
  • * Flexible solution
Application
  • Supermarket
  • Warehouse
  • Industrial
  • Other indoor lighting
Trunking Rail
  • • Separate power supplies, dimming or emergency supply can be integrated
  • • Electrical feed possible in central or end area of a trunking rail arrangement via special trunking rail element
  • • Trunking rail modules with pre-assembled connectors
  • • Wide distances between suspension points to 3m with self-supporting connector elements
  • • Simple mounting of trunking rail elements with pre-assembled connectors with integral plug-in system (electrical and mechanical connection)
Rail
  • • 3-phase pre-selection via moving of contact pin prior to installation in rail
  • • Trunking rail as standard with 5, 7 or 11-core through-wiring with 2mm? cable cross-section
  • • The maximum current is 16A, allowing 44 LED Linear of 150cm 80W in one serial
Emergency Lighting Function

• It can work on normal mains and automatically switch to emergency supply in the event of a power failure to provide sufficient light and ensure safe evacuation in emergency situations.

• A wide variety of self contained battery is available, as well as two independent emergency lighting circuits in the trunking.

Installation
  • • Pendant Chain Installation
  • • Pendant Cord Installation
  • • Pendant Rod Installation
  • • Surface Mounted
  • • Mounting Clip
Dimming & Multi-Sensor System

• 3 different dimming system, DALI, 1-10V and DIMswitch

• It does not only have an integrated microwave sensor for movement detection, but also a daylight sensor.

Node Connector

• L, T and X Standard Module Node connectors

• Each node connector has diverse of electrical feed-in and feed-out

Wiring Information:
5/7/11 wiring are available

The cable in the trunking with preassembled connector makes,it possible to join trunking units without the use of any tools,which really helps save much labor cost. 5, 7 or 11-core trunking is available. Customised trunking mode is flexible, e.x, the function of 2 line in 7-core trunking could be DALI dimming or Emergency lighting.

2 control lines with DALI control signal for brightness control (2 x 2.5 mm?)

4 poles for two independent emergency lighting circuits (4 x 2.5 mm?)

5 connections for power supply (5 x 2.5 mm?)

· Load sharing allows triple continuous- row length

· Separately switchable circuits for extremely easy light control in triple circuit

Surface in white , black or sliver finish

Luminaire

A continuous-row LED lighting system could be created only by a trunking unit and an LED luminaire. It appears as a consistent continuous-row system, without any visual interruption or different reflectors. The luminaire and trunking are perfectly matched to each other.

Leds Feature

With a color rendering index of Ra > 80, color temperatures of 3000 K, 4000 K7 5000 K and 6000 K, and low UGR, it could meet environmental requirements and comply with funding guidelines for energy-efficient building and lighting solutions.

For special applications where requisited high accuracy of color, such as in museum, jewelry store, printing factory and so on, CRI95 linear series is highly recommended

Optics

The high light efficiency of 160 Im per Watt makes reduction on energy consumption and additional cost. The LEDs keeps enough margin to make sure the luminaire efficiency reach the best level.

Multi-Sensor System

Multi-sensor system combines energy saving with highly convenience for user. Most energy can be saved by integrating motion and daylight sensor into the trunking. It can swivel and help to detect the area accurately. It ensures a sufficient level of brightness in specific areas under a defined period of time.

Emergency Lighting

Emergency lighting systems ensures optimum lighting and orientation, even in the event of a power failure. General lighting and emergency lighting are combined in a single highly functional, integrative lighting solution.


A wide variety of emergency mode is available,

· Central battery systems / Generator

EL1 EN1 & EL2 EN2 makes mode selected

· Self contained battery

Under this mode, the luminaries could be 6W or 12W, working for 1.5 hours or 3 hours (depending on the demand selected in advance)

Ni-MH battery we used is high temperature resistant to makesure its life time could be longer than others.


A small spotlight is available on 600mm module as an extra version featuring a rotating lighting head for emergency use of 5W.

Dail And Dimming System

Efficient tools for lighting are the basis for solutions with low operating overheads and high quality of light. Supplemented with suitable light control, savings potential can be further significantly increased. The right type of light management depends decisively on the specific building conditions and usage of the area.


With a wide variety of dimming light control systems with suitable sensor technology, and thanks to open, non-proprietary standards, such solutions can be simply integrated into common building management systems.

Exhibition

Online ServiceClose